SafeSorb Fluid Solidifier 500cc

Contents will solidify up to 500cc's of liquid waste.

Directions for use

1. Wear hand and eye protection when handling infectious waste.
2. Shake bottle vigorously to loosen settled material
3. Before the procedure*, open accessory port on top of the suction canister lid.
4. Empty bottle into suction canister.
5. Close the accessory port.
6. Dispose of canister in accordance with your facilities’ protocol and local, state and federal regulations.

* SafeSorb can also be added to the canister at the conclusion of the procedure.

SafeSorb Fluid Solidifier 1500cc

Contents will solidify up to 1500cc's of liquid waste.

Directions for use

1. Wear hand and eye protection when handling infectious waste.
2. Shake bottle vigorously to loosen settled material
3. Before the procedure*, open accessory port on top of the suction canister lid.
4. Empty bottle into suction canister.
5. Close the accessory port.
6. Dispose of canister in accordance with your facilities’ protocol and local, state and federal regulations.

* SafeSorb can also be added to the canister at the conclusion of the procedure.

SafeSorb Fluid Solidifier 1500SP

Contents will solidify up to 1500cc's of liquid waste.

Directions for use

1. Wear hand and eye protection when handling infectious waste.
2. Shake bottle vigorously to loosen settled material
3. Trim plastic tip with scissors at a 45° angle (cut ½ inch off the top of the pour sprout).
4. Fully extend the suction liner.
5. Before the procedure*, insert the pour sprout into the largest suction tube port.
6. Empty bottle into the suction canister and attach suction tubing.
7. Dispose of canister in accordance with your facilities’ protocol and local, state and federal regulations.

* SafeSorb can also be added to the canister at the conclusion of the procedure.

SafeSorb Fluid Solidifier 3000cc

Contents will solidify up to 3000cc's of liquid waste.

Directions for use

1. Wear hand and eye protection when handling infectious waste.
2. Shake bottle vigorously to loosen settled material
3. Before the procedure*, open accessory port on top of the suction canister lid.
4. Empty bottle into suction canister.
5. Close the accessory port.
6. Dispose of canister in accordance with your facilities’ protocol and local, state and federal regulations.

* SafeSorb can also be added to the canister at the conclusion of the procedure.

SafeSorb Fluid Solidifier 16000cc

Contents will solidify up to 16000cc's of liquid waste.

Directions for use

CANISTER

1. Wear hand and eye protection when handling infectious waste.
2. Shake bottle vigorously to loosen settled material
3. Trim plastic tip with scissors at a 45° degree angle.
4. Before the procedure*, open the accessory port on top of the suction canister lid.
5. Empty the amount of contents equal to the maximum capacity of the suction canister (Example: Empty 3 ounces of SafeSorb for a 3000cc canister).
6. Close accessory port.
7. Dispose of canister in accordance with your facilities’ protocol and local, state and federal regulations.

SPILLS

1. Wear hand and eye protection when handling infectious waste.
2. Shake bottle vigorously to loosen settled material
3. Trim plastic tip with scissors at a 45° angle.
4. Squeeze bottle to evenly distribute SafeSorb over the fluid spill area.
5. After the spill area is solidified, sweep up waste and dispose of in accordance with your facilities’ protocol and local, state and federal regulations.

* SafeSorb can also be added to the canister at the conclusion of the procedure.